YB28VE W Waterproof Electrical Car Digital Display Battery Indicator Voltmeter

Description

Features:
This table can set the battery type by the key: acid battery, lithium battery, nickel-hydrogen battery, also can set the battery number by the key (battery number in series).
This table is suitable for: 12V, 24V, 36V, 48V, 56V, 60V, 64V, 64V, I2V, 84V battery car, electric vehicle, battery pack, balance car, inverter, electric forklift truck, sightseeing car, electric vehicle, automobile battery battery, battery power mobile equipment, etc. It can also be used for other voltage and power test purposes.
This table can be tested to show the real-time voltage, quantity of electricity, percentage of electricity.
Display mode optional: single display voltage;Single display percentage of electricity;Voltage, percentage of electricity cycle display (default).
Two-wire system, wide supply voltage, test heavy voltage: DC 6120, simple connection, convenient.
With reverse protection function, the reverse connection won't burn.
Low power flash alarm reminding function.
LED color display, high-grade .
Specification:
Power supply voltage: DC6-120 (wide range, temperament: maximum input voltage can not exceed 120 V, otherwise there is a of burning
Test voltage: DC6 ~ 120V (decimal point automatic )
Minimum resolution below 10: Q. 1V
Minimum resolution of more than 100: 1V
Power resolution:1%
Working current: <20mA display mode: LED color screen
Installation hole: 47.2 * 27.3 mm
Measurement rate: ≥ 500ms/ times
Voltage measurement accuracy:1% (± 2)
length:> 150mm
Minimum supply voltage: 6V
Maximum supply voltage: 120V
Operating temperature:-10 ~ + 65
Working humidity:10 ~ 80% (without condensation)
Working pressure:80 ~ 106 kPa
Sunlight exposure: no direct exposure
Package List:
1*Voltage Battery Indicator
Note:
This watch is not suitable to be installed on the circuit with lamp, the lamp will have thousands of volts of high voltage in the moment of opening, there is a chance to directly burn the watch head, if it must be installed, can not be installed on the same line, the watch head should also be away from lamp.
Operating instructions:
According to polarity, the red and black lines on the watch head will be connected to the positive and negative poles of the battery respectively. At this point, the watch head will immediately show the real-time voltage, electricity, percentage of electricity
The factory default value of this table:
Battery type: -acid electricity, 12V, one section
Display mode: power, voltage and percentage of electricity cycle display
Set mode entry:
In normal mode, press the key for several seconds to enter the setting mode, display:1-U, each click to switch to the mode key order:1-U 2-b 3-C 4-d
mode:
1-U: Voltage fine-tuning
2-b: battery type setting
3-C: battery number setting
4-d: Display mode setting
Voltage fine tuning (calibration):
In the set mode, press the key to switch to display 1-U, press the key to enter the voltage calibration mode for a long time.
At this point release the key again long press, the voltage up fine-tuning;Loosen the key and press it again for a long time. The voltage is fine-tuned downward. After adjusting to the standard value repeatedly, loosen the key. Wait for the screen flicker to save the settings and exit the setting mode.
Battery type selection:
In the setting mode, press the button to switch to display 2-b, press the button to enter the battery type selection mode for a long time, each "click" will switch one battery type, the battery type cycle switch order: 1.2V _ 2V _ 3.3V _ 3.7V _ 12V
1.2V: On behalf of Ni-MH battery, the single voltage is 1.2V.
2V: Represents -acid battery, the single voltage is 2V
3.2V: Represents the iron phosphate lithium battery, the single section voltage is 3.2V3.7V: Represents the lithium battery, the single section voltage is 3.7V
12V: Represents -acid battery, the single voltage is 12V
When switching to the corresponding battery type, immediately release the button, wait for the screen flash save settings and exit the setting mode.
Battery number setting:
In the setting mode, press the button to switch to display 3-C, the long press button into the battery number setting mode, then release the button and press the long press again, the value up;Loosen the key and press it again for a long time, the value will down, and adjust the number of batteries repeatedly.
Wait for screen flash save settings and exit settings mode
The range of "segment number" for different types of batteries is as follows:
12V acid battery:1-10
3.7V lithium battery:2-28
3.2 V lithium ion battery:2-32
2V acid battery:3-60
1.2V Ni-MH battery:10-70
Display Mode Settings:
In set mode, press the button to switch to display 4-d, press the button for a long time to enter the display mode settings.
At this point release the button, each "click" switch a display mode: V _ only display voltage,% _ only show percentage of electricity, V%-a cycle display
When switch to the corresponding display mode, immediately release the button, wait for the screen flicker save settings and exit the setting mode after each adjustment value setting, wait for the screen flicker automatically save exit after the operation, otherwise the new adjustment value will not be saved.
We accept PayPal .
We ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
All the items will be dispatched within one business day by Airmail after the payment is clear.
Most times you will receive your order within 10-30 business days after we transfer your package to the delivery company. We cannot guarantee the delivery timeframe if the post office has any unexpected delays due to holiday, weather, customs, or other conditions. Some countries like Russia, Brazil, or some European countries may take up to 50 days or longer for delivery.
We appreciate your patience if you haven't received items in 30 days(Russian customers may need more patience by reason of the local delivery system and/or customs). If you are concerned in any way, please feel free to contact us via ebay message
instead of leaving negative/neutral feedback or opening a dispute
.
We will do our best to solve any problem(resend or refund any missing item).
Customs duty is obligation and liability of
citizen
s in your country, so buyer should be responsible for any tax and custom duty incurred. Generally, the delay or failure delivery is sometimes caused by the policy of different customs.
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3.
T
he duties are buyers' responsibility
.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.
1. Any questions,
pls. contact us via ebay message or email us.
We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "
5
" in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
On Sep 22, 2022 at 19:21:11 PDT, seller added the following information: