HIGH FIDELITY SOUND SYSTEM LITZ Wire 40 ft 20 AWG 200 KHz coated

Description

USE IN HIGH FIDELITY SOUND SYSTEMS FOR EXCELLENT HIGH FREQUENCY RESPONSE TO YOUR SPEAKERS FROM THE AMPLIFIER.
ALSO USED TO PROVIDE DC (12 VOLT ) POWER TO THE AMPLIFIER GIVING PEAK INSTANT POWER TO DRIVE THE SPEAKERS IN THE HIGH FREQUENCY RANGES
INSULATED TUBE MUST BE USED FOR 12 VOLT USE IN A CAR DIRECTLY FROM THE BATTERY.
Your purchase is for 40 feet of wire and will be removed from the spool.
If you want a un cut length . Order 2 for 80 feet , 3 for 120 feet ....etc.
LITZ wire is used to lower the AC /RF resistance (reactance) in High Frequency Ranges.
It reduces the "Skin effect" by using fine wire bundeled or braided into a larger wire.
Photos shows actual product.
As you can see , the label is mostly destroyed with little information.
The wire is composed of 6 smaller braids each with 18 single strands ( as best I can count) so that makes 108 total strands.
Each strand is .0003 inches in diameter close to 40 AWG wire size
Looking carefully I can see an xxx8/40 text letting me to believe it is 108/40 for 108 strands of 40 AWG coated wire.
I checked the type 3 wire types. This is most likely 20 AWG litz with upper frequency limit of 200Khz
Coating is removable using molten solder. (Solderable)