ESSEX MAGNET WIRE 19 AWG GAUGE ENAMELED

Description

Product Description
|
Shipping Policy
|
Magnet Safety Warning
|
F.A.Q.
|
Return Policy
Essex Magnet Wire 19 AWG Gauge Enameled
High Temp Class 200C Heavy Build
Premium quality Essex magnet wire in original factory spool
High temperature Class: 200°C (392°F)
In original factory packaging. Missing Essex paper covering around wire spool. Made and spooled by Essex.
UL recognized Class 200 magnet wire
Essex is the world’s largest producer of magnet wire
Why should you buy original Essex factory magnet wire spool?
This is not a re-spooled roll
.
Original factory spool is professionally wound by the magnet wire manufacturer.
Unprofessional re-spooling can easily damage or scrape the insulation film, damaged magnet wire can not be used for coil winding.
Poorly re-spooled wires can ultimately reduce coil winding quality.
Dimensional Data
Nominal Diameter: 0.0385 inch
Nominal OHMS/LB. -20 Celsius: 2.015
Feet/LB: 250.5
Magnet Wire Spool Weight
Range : 9 to 10 pounds.
Magnet Wire Technical Specifications:
Conforms to MW-35C, UL recognized Class 200
High temperature Class: 200°C (392°F)
Magnet Wire AWG size: 1
9
AWG, round
Insulation type: modified polyester base-coat and an improved polyamideimide topcoat
Insulation build: heavy build, more durable than single build
Magnet Wire Spool Weight
Range : 9 to 10 pounds.
Magnet Wire Applications:
Wind Generators
Fractional and Integral HP Motors
Hermetic Motors
DC Motors
Power Tools
Automotive Alternators and Generators
All Dry Type Transformers, Class 105 through 200
Electronics, All Types of Coils, Class 105 Through 200
Arts & Crafts
This type of Essex magnet wire is the standard of comparison for magnet wire performance in virtually every severe and heavy duty application. The combination of a modified polyester base-coat and an improved polyamideimide topcoat results in an insulation system with outstanding physical toughness, excellent dielectric properties, and superior chemical resistance to most common solvents and refrigerants.
Wind-ability of this type of Essex magnet wire, verified by years of experience on virtually every type of winder, has always been excellent. Improvements in the topcoat have resulted in a product that is even more superior with regard to high slot fill and insert-ability.
Lowest price on eBay, Guaranteed!
This wire is designed & manufactured to meet the highest quality standards.
Buy with confidence from us:
Trusted and reliable global magnet distributor and supplier.
Committed to customers with lowest price, highest magnet quality.
Honesty and trustworthiness are our #1 priority.
Outstanding customer service.
Proven track record and excellent reputation.
All of our Neodymium Iron Boron magnets are manufactured in ISO certified factory.
To buy additional or other size magnets please visit
our store
inventory to purchase.
Shipping Policy
This item will be shipped using UPS Ground.
UPS Tracking is extremely accurate.
If your package has not arrived within the UPS estimated delivery time, please use your UPS tracking number to locate your package.
UPS have very detailed information about the delivery time of your package.
WARNING:
Very strong magnets.
Fingers could be severely pinched between two or more magnets.
KEEP OUT OF REACH OF ALL CHILDREN.
THIS IS NOT A TOY.
DO NOT ingest or inhale.
DO NOT place in nose, mouth or any other part of the body.
Swallowed magnets can stick to intestines causing serious injury (NECROSIS) or even DEATH.
Seek immediate medical attention if any magnet(s) are swallowed or inhaled.
Neodymium Magnets are BRITTLE.
They can SHATTER, CRACK, PEEL or SPLINTER if allowed to snap together or slam into a metal object.
Broken magnets can be Extremely SHARP.
MAGNETIC MEDIA AND ELECTRONIC EQUIPMENT HAZARD.
KEEP AWAY from PACEMAKERS AND INTERNAL MEDICAL DEVICES.
Magnetized materials are REGULATED FOR AIR TRANSPORT and are considered a HAZARDOUS MATERIAL.
Neodymium magnets will lose their magnetic properties if heated above 175°F (80° C).
Do Not cut or drill Neodymium Magnets, there is a both a fire and fracture hazard and the dust is toxic.
Magnet Tolerance +/- .005"
Pull Force
Pull Force is the amount of force required to separate 2 of the same size magnets from each other.
Actual pull force of cylinder/disc magnets may vary depending on different applications due to the small contact surface or magnets to curved surfaces due to the small contact surface.
Please test them before usage.
Rule of thumb is that the magnet will hold approx. 1/3 the weight of the stated pull force.
So...If pull force stated is 90 lbs...the magnet will hold approx. 30 lbs in weight hanging from it.
Also..If you are trying to stick the magnet to stainless steel...the better the quality of the stainless steel...the less the magnet will stick.
Frequently Asked Questions
Q: When will my order ship?
A:
Orders are shipped within 1 business day of their receipt.
Q: What does grade N52, N50, N48, N45 and N42 mean?
A:
The strength of neodymium magnets is given by a grading from N24 for the lowest strength magnets to N54 for the strongest. Each number higher is about 1% stronger than the previous number grade.
Q: Can I cut or drill neodymium magnets?
A:
NO, with cutting or drilling there is a both a fire and fracture hazard and the dust is toxic.
Q: How long will Neodymium magnets last?
A:
400 years, if not subjected to sharp impacts or higher than rated temperatures.
Q: What are the tolerances of our magnets?
A:
+ or - 0.005"
Q: Are our HYenergy line of wind turbines UL or ETL approved?
A:
Our HYenergy line of 5 blade wind turbines have ETL approval. ETL Will also pass for UL approval.
Q: To what temperature can Neodymium magnets be subjected before they start losing their magnetic force?
A:
176 degrees Fahrenheit or 80 degrees Centigrade.
Q: Where are the poles on rectangular, bar, and block magnets?
A:
All our rectangular magnets are magnetized through the thickness. The poles are always on the surfaces of the 1st two numbers of the measurements.
Q: Where are the poles on cylinder and disc magnets?
A:
The poles are always axially magnetized through the thickness. This means the poles are on the flat surfaces unless stated that they are diametrically magnetized which means the poles will be on the curved sides.
Q: Do you offer combined shipping
A:
We do not offer combined shipping.
Q: What is Pull Force? 1
A:
Pull Force is the amount of force required to separate 2 of the same size magnets from each other. Actual pull force of cylinder/disc/cup/ hook magnets may vary depending on different applications due to the small contact surface or magnets to curved surfaces due to the small contact surface. Please test them before usage.
Q: What is Pull Force? 2
A:
Rule of thumb is that the magnet will hold approx. 1/3 the weight of the stated pull force. So if pull force stated is 90 lbs the magnet will hold approximately 30 lbs in weight hanging from it. Also if you are trying to stick the magnet to stainless steel the better the quality of the stainless steel the less the magnet will stick.
Q: What are diametrically magnetized cylinder magnets?
A:
Diametrically magnetized cylinder magnets have the poles (attraction) on the curved sides instead of on the flat ends.
Return Policy
After receiving the item you must contact us within 14 Days.
Your refund will be processed back to your PayPal account.
The buyer is responsible for paying the return shipping charge.
If for any reason, you are not satisfied with our products, you may return purchased products within 14 days of purchase.
ALL RETURNS ARE SUBJECT TO A 15% RE-STOCKING FEE.
You will get a refund for returned products if they are in original condition.
We do not accept returns if returned products are not in the original condition.
We do not accept returns for used or damaged magnets.
If the returned magnets are not separated with original spacers but the magnets are in original condition, we will charge A 20% restocking fee.
Shipping costs are not refunded.
For free shipping listings, actual shipping cost will be deducted from refund.